IT Blog

UCS: Blade is stuck in EFI Shell, service profile association stuck

by on Dec.11, 2013, under Cisco, UCS

After associating service profile to a blade it gets stuck in EFI Shell and association can not complete.
The KVM is showing EFI Shell
1

FSM status is stuck onĀ Configure Apply Config
2

The problem could be because the service profile does not have all the required configuration. Have a look at Status under GeneralĀ tab to see what is the error.
3

In this case there were no MACs or WWPNs defined. CNA cards must have these defined as they do not have them burned in.

 

:, ,

Leave a Reply