SCCM: Image Capture Wizard has failed with error code (0x800704CF)

12 May

During image capture process you receive the following error:
Image Capture Wizard has failed with error code (0x800704CF). For more information, please contact your system administrator or helpdesk operator.

Now if you look at task sequence log it most likely going to say:
Failed to run the last action: Capture the Reference Machine. Execution of task sequence failed.
The network location cannot be reached. For information about network troubleshooting, see Windows Help. (Error: 800704CF; Source: Windows)

This basically means that the network drive that you are trying to capture image to cannot be accessed. Make sure that the user you’ve provided in capture wizard has enough rights to access the network drive and write to it.

Tags: , , , ,

5 Responses

  1. fahad says:

    Account can access the betwork path but still facing the same issue.

  2. Alex says:

    Check the logfile created in c:\SMSTSlog
    you will probably see that there is no network card found.

    You have to create a new Boot.wim (Winpe) image with Network card drivers suited for your hardware.

  3. milkweedz says:

    The easiest way to get rid of this problem is to plug in another disk and dump the image into the secondary disk…then copy it out into your SCCM server shared folder.

  4. Anil Batra says:

    Save the wim to your c drive then copy and paste it to the server. This is the best method.

Leave a Reply to fahad

IT Blog

Just another blog on Kozeniauskas.com Network