look at my speaker 🙂

Hello, I got my planks 😀

Cut the holes

the new one with the old one

And my nightmare, the wiring…

I lacked out of LED so I had to reduce some visualizations

most of the LED in place and ON

LED through the organic glass (used sand paper on one side)

Another speaker…

Missing part list:

LED, organic glass, the box planks and that’s about it 🙂

The amplifier is ready do work!

just look at this brand new woofer for my speaker 🙂 “PUNCH” s1 15 inch /38 cm

And the velleman K8081 power amplifier assembly begins!

the amplifier has arrived!

hell of a work is waiting…

so… a bit of a “real” view

so I made poll on facebook.com

and the winner is:

Number 3!

Hello,
This will be my exam. I decided to make a sound speaker with lights and an amplifier in it. but first I have to decide what design I should use… The bold lines symbolises the light. The speaker will be black with white lights.

here’s what i’m trying to do ( 1:07)

http://youtu.be/pQSk4XoySok

code that now stops

/*

Led imitacija dviraciui “T8 lempos”
*/

boolean ledOn = false;

void setup() {
//nusakomi naudojami pin
pinMode(13, OUTPUT);
pinMode(12, OUTPUT);
pinMode(11, OUTPUT);
pinMode(10, OUTPUT);
}

void loop() {
if (ledOn == false)
{
startLed();
ledOn = true;
}
}

void startLed()
{
digitalWrite(13, HIGH);   // ijungia LED
delay(200);              // ijungimo laikas
digitalWrite(13, LOW);    // isjungia LED
delay(500);              // isjungimo laikas
digitalWrite(13, HIGH);
delay(200);
digitalWrite(13, LOW);
delay(500);
digitalWrite(13, HIGH);
delay(30);
digitalWrite(13, LOW);
delay(30);
digitalWrite(13, HIGH);
delay(30);
digitalWrite(13, LOW);
delay(30);
digitalWrite(13, HIGH);
delay(30);
digitalWrite(13, LOW);
delay(30);
digitalWrite(13, HIGH);
delay(30);
digitalWrite(13, LOW);
delay(30);
digitalWrite(13, HIGH);
delay(350);
digitalWrite(13, LOW);
delay(300);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(300);
digitalWrite(13, LOW);
delay(200);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(500);
digitalWrite(13, LOW);
delay(100);
digitalWrite(13, HIGH);
delay(500);
digitalWrite(13, LOW);
delay(100);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(600);
digitalWrite(13, LOW);
delay(200);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(500);
digitalWrite(13, LOW);
delay(200);
digitalWrite(13, HIGH);
delay(300);
}