The amplifier is ready do work!

just look at this brand new woofer for my speaker 🙂 “PUNCH” s1 15 inch /38 cm

And the velleman K8081 power amplifier assembly begins!

the amplifier has arrived!

hell of a work is waiting…

so… a bit of a “real” view

so I made poll on facebook.com

and the winner is:

Number 3!

Hello,
This will be my exam. I decided to make a sound speaker with lights and an amplifier in it. but first I have to decide what design I should use… The bold lines symbolises the light. The speaker will be black with white lights.

here’s what i’m trying to do ( 1:07)

http://youtu.be/pQSk4XoySok

code that now stops

/*

Led imitacija dviraciui “T8 lempos”
*/

boolean ledOn = false;

void setup() {
//nusakomi naudojami pin
pinMode(13, OUTPUT);
pinMode(12, OUTPUT);
pinMode(11, OUTPUT);
pinMode(10, OUTPUT);
}

void loop() {
if (ledOn == false)
{
startLed();
ledOn = true;
}
}

void startLed()
{
digitalWrite(13, HIGH);   // ijungia LED
delay(200);              // ijungimo laikas
digitalWrite(13, LOW);    // isjungia LED
delay(500);              // isjungimo laikas
digitalWrite(13, HIGH);
delay(200);
digitalWrite(13, LOW);
delay(500);
digitalWrite(13, HIGH);
delay(30);
digitalWrite(13, LOW);
delay(30);
digitalWrite(13, HIGH);
delay(30);
digitalWrite(13, LOW);
delay(30);
digitalWrite(13, HIGH);
delay(30);
digitalWrite(13, LOW);
delay(30);
digitalWrite(13, HIGH);
delay(30);
digitalWrite(13, LOW);
delay(30);
digitalWrite(13, HIGH);
delay(350);
digitalWrite(13, LOW);
delay(300);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(300);
digitalWrite(13, LOW);
delay(200);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(500);
digitalWrite(13, LOW);
delay(100);
digitalWrite(13, HIGH);
delay(500);
digitalWrite(13, LOW);
delay(100);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(600);
digitalWrite(13, LOW);
delay(200);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
digitalWrite(13, HIGH);
delay(500);
digitalWrite(13, LOW);
delay(200);
digitalWrite(13, HIGH);
delay(300);
}

Hello,
I got a lot further with the plane!
Installed rudder and elevator servos, installed a motor, wing coverings are quite done! fuselage covering is quite done! ruder, elevator snails glued in place, glued air intakes and finishing the cockpit covering!

okay, here’s the hard part… the right programing to make it look like T8 lamps…
this is how far i have gone with the arduino. I’m using Arduino duemilanove. i will need to make 4 blinking Led strings so for prototype i use 4 LED. I’m programing only one of them, and that’s quite hard to make it realistic enough…

Continue reading Bycicle lights inspired by Tron pt. 2 →

little update