hello, so… this will be short…
I broke it
I fixed it using epoxy!
Hello,
I seen it before, but I didn’t gave a lot of attention to my head phones size. Recently some people said that they are big… and look strange. I walk everywhere with them, so I thought to “shrink” them (make them thinner)
I have these head phones for like 5 or more years and they are quite shabby
I remade them few year ago to this:
And now I decided to remake them again…
I disassembled them in peaces and cut the unwanted plastic pieces. This modification does not affect the quality of them because the speakers are sealed.
First throws of my new toy 🙂
Hi, I bought a DLG glider named BLASTER 2. It is a second handed glider, because the new ones are quite expensive. While waiting for my plane I started researching how to set my remote right. And I faced a problem with the flying mode switch…
I looked everywhere, but I didn’t found any useful information, but I managed to configure it by my self.
E switch on Futaba T7C
(ail) to 1 at the receiver ail 2 to 6
press Mode select D/R, EXP.
D/R, EXP SW>E
CH>1-AIL (-)
D/R> 100%
Exp> + 0% (here you can chose the sensitivity of your model)
next press END and MODE (Advanced menu)
select FLAPRN
FLAPRN >ON
DIFF> +6 (select the difference between the ail movement)
AIL-2>CH6
END
select P-MIX1
P-MIX1 ON also can be OFF,depends on the switch position
MAS>OFS
SLV>CH1
SW>E (wanted position)
back using select (cursos)
P-MIX1 OFS->1
RT>+ 55% the amount is your choice. when switching E you should see ONE Aileron moving
END, P-MIX2
P-MIX2 >ON or OFF
MAS>OFS
SLV>CH6
SW>E (same position as in mix 1)
back to
P-MIX2 OFS->6
RT> – 44% (select the amount)
Video:
So this is the video of the first flight! it was quite windy and COLD! but it flies perfectly! but when I landed my ailerons broke off the tape (I suppose it is because of the cold)
So I can say that this is the END! I will make the LED to blink to music and that’s about it! Enjoy!