Hi, I bought a DLG glider named BLASTER 2. It is a second handed glider, because the new ones are quite expensive. While waiting for my plane I started researching how to set my remote right. And I faced a problem with the flying mode switch…
I looked everywhere, but I didn’t found any useful information, but I managed to configure it by my self.

E switch on Futaba T7C
(ail) to 1 at the receiver ail 2 to 6

press Mode select D/R, EXP.
D/R, EXP SW>E
CH>1-AIL (-)
D/R> 100%
Exp> + 0% (here you can chose the sensitivity of your model)

next press END and MODE (Advanced menu)
select FLAPRN
FLAPRN >ON
DIFF> +6 (select the difference between the ail movement)
AIL-2>CH6

END

select P-MIX1

P-MIX1 ON also can be OFF,depends on the switch position
MAS>OFS
SLV>CH1
SW>E (wanted position)

back using select (cursos)
P-MIX1 OFS->1

RT>+ 55% the amount is your choice. when switching E you should see ONE Aileron moving

END, P-MIX2

P-MIX2 >ON or OFF
MAS>OFS
SLV>CH6
SW>E (same position as in mix 1)

back to
P-MIX2 OFS->6

RT> – 44% (select the amount)

Video: