Hello all, this will be a brand new project for bicycle lights. This whole project was inspired by a film named Tron legacy, which i love and became a fan!

So for my Project I’m planing to use:

1. a hobby battery pack 12v

2. Some waterproof sticky led line (1 meter)

3 Hot glue gun
4. Arduino
5. some wires
6. for some spec effects arduino maybe 🙂
7. soldering-iron And ETC.

So the beginning

Step 1
plan you LED’s, cut them if you want to use it in separate places (like i do) and unseal the connections from the silicon. (i needed 1 unsealed part for one led line, and 2 unsealed par for the one that goes to the battery (the beginning and the end)

Step 2
Stick your LED’s to wanted places you may glue it with hot glue, but the LED’s are quite sticky. so i used hot glue for reinforcement, then wire your LED’s and again use hot glue for the wiring parts to isolate them and for reinforcement.

Step 3
Make sure everything is wired correctly and see if it works!

This is what i have now:

No lights

Lights on!

 

I tired the lights in my town, and they work great! I am visible at night and i can see better, although it scared some people (because they never seen something like this and moving 😀 ) this is the thing! it need some improvements, but about them later  🙂